Documenting the NAS box and related setup procedures
Re: Documenting the NAS box and related setup procedures
Oh. No. I misread your query. To be honest, I'm not sure, because the only way to set it up (according to the Manual) is via the D-Link Wizard. On Page 183 of the Manual it says to use http://dlink-nas/ to get to the device settings and I cannot recall if I was able to do everything from there or just do the initial setup in Windows.
Once you get to the Settings Page, you can change the IP Address, which is what I must have done.
Once you get to the Settings Page, you can change the IP Address, which is what I must have done.
Terry
Re: Documenting the NAS box and related setup procedures
I'll just factory reset it and figure out what it does then. It's the best way to test my instructions work anyway
Hamish
Re: Documenting the NAS box and related setup procedures
It turns out not to have one, so I've just put a note in about using the software cd (also on the file server) to do initial setup instead.
I've gotten quite a lot done, but I'll post it tomorrow so I have some time to think about what I need to document next.
I've gotten quite a lot done, but I'll post it tomorrow so I have some time to think about what I need to document next.
Hamish
Re: Documenting the NAS box and related setup procedures
Hamish,
In the instructions for the building of the Cross-compile, under 'Menu configuration' you say 'Download the latest version of the configuration from the end of this post'.
Is there any reason why those files at the end of the post can't go into the fileserver?
In the instructions for the building of the Cross-compile, under 'Menu configuration' you say 'Download the latest version of the configuration from the end of this post'.
Is there any reason why those files at the end of the post can't go into the fileserver?
Terry
Re: Documenting the NAS box and related setup procedures
No, I think I just make the instruction before we had the file server set up.
Hamish
Re: Documenting the NAS box and related setup procedures
Actually looking at those attachments, are the old config and ovf.txt files actually needed?
Terry
Re: Documenting the NAS box and related setup procedures
The OVF is useful for re-compressing the VM, though hardly essential, and yeah the old config was just there in case I happened to need it eventually, but we don't need it any more.
Hamish
Re: Documenting the NAS box and related setup procedures
The OVF is part of the download for the VM at the beginning of the description.
Terry
Re: Documenting the NAS box and related setup procedures
Yes, it also stores the machine configuration in the OVA file along with the HDD image. We don't necessarily need it as an attachment on that post though.
Hamish
Re: Documenting the NAS box and related setup procedures
OK. I'll just copy the latest config file to 'Settings' at https://wmtprojectsforum.altervista.org ... x/Settings.
Does that make sense?
Does that make sense?
Terry