Basic engineers view-only diagnostic GUI
Re: Basic engineers view-only diagnostic GUI
Hmmm. I've just looked again and realised that it should have been engineer-gui/engineer-gui. If it doesn't work on Tuesday try putting http:// in front of it.
A thought. Did you omit the Quotes?
If none of that works, try 'nasbox' without the quotes.
If that doesn't work, I'll have to think again.
A thought. Did you omit the Quotes?
If none of that works, try 'nasbox' without the quotes.
If that doesn't work, I'll have to think again.
Last edited by TerryJC on 27/09/2020, 17:11, edited 1 time in total.
Terry
Re: Basic engineers view-only diagnostic GUI
Terry
No quotes were used.
Penri
No quotes were used.
Penri
Re: Basic engineers view-only diagnostic GUI
Apologies, I didn’t get around to testing out the suggestions above this morning, too many other tasks, sorry.
Re: Basic engineers view-only diagnostic GUI
That's OK. I'm not sure how useful it would be anyway.
Terry
Re: Basic engineers view-only diagnostic GUI
I have updated the GUI to include more human-readable names in the dropdown list. It is deployed on-site. Penri, is this what you wanted?
Hamish
Re: Basic engineers view-only diagnostic GUI
Can't take a look just now will try later and let you know.
Thanks
Thanks
Re: Basic engineers view-only diagnostic GUI
OK, popped in today, on my way elsewhere.
Tried engineer-gui and engineer-gui/engineer-gui, to no discernible effect, then added http:// before them and bingo everything came good. I did not do an exhaustive test of all possibilities at it was raining.
The Plain English additions to descriptors work for me, thank you Hamish.
Unfortunately I didn’t have time to check levels today but as I’m there tomorrow will do it then.
The FTTC connection was enabled today, measured 30 odd Meg download and 10 odd upstream.
Tried engineer-gui and engineer-gui/engineer-gui, to no discernible effect, then added http:// before them and bingo everything came good. I did not do an exhaustive test of all possibilities at it was raining.
The Plain English additions to descriptors work for me, thank you Hamish.
Unfortunately I didn’t have time to check levels today but as I’m there tomorrow will do it then.
The FTTC connection was enabled today, measured 30 odd Meg download and 10 odd upstream.
Re: Basic engineers view-only diagnostic GUI
Perhaps best to make it http://nas/engineer-gui Terry?
Ah good, glad they work better.
I will test the VPN speed now to see if it's a bit better.
Ah good, glad they work better.
I will test the VPN speed now to see if it's a bit better.
Hamish
Re: Basic engineers view-only diagnostic GUI
Hamish,
That occurred to me as well. However, as Penri pointed out, once the browser has the IP Address in its history, it makes little difference,
That occurred to me as well. However, as Penri pointed out, once the browser has the IP Address in its history, it makes little difference,
Terry