G4 Hall Effect Probe

[TerryJC]

Penri,

Do you need a hand?

I can come if it would be useful.

[Penri]

I’ll be there around 14:00, I can manage the installation but if you are able to check initial in-situ operation that would be great. Otherwise we check it next week to see if what I’ve done has made a difference.

[TerryJC]

OK. I'll get there around 2.

[TerryJC]

Given the probe a bit of a going over, re-soldered joints which may have been dry, checked voltages at each node and checked the operation of each of the Hall-effect switches. I'm currently giving it a bit of a shake test to see if any problem surface.
It is passes I intent taking it down to WMT and re-installing in the stage, this afternoon, to see how it performs in situ.

Penri installed the old Wendy Butts probe into the Stage Butts probe position and it seemed to be working when we tested it.

However, there were problems with Wendy Butts Pi and the Wendy Butts Gate Valve, see viewtopic.php?f=14&t=195.

[hamishmb]

Excellent, I'm glad you got it working. I have replied in the other thread.