Document Used to Form the Basis of the Design

Post Reply
TerryJC
Posts: 2616
Joined: 16/05/2017, 17:17

Document Used to Form the Basis of the Design

Post by TerryJC »

Attached is the simple document provided to me at the beginning of this project. It has been used as a starting point for the design of the hardware and will also be used to inform the software development.
Attachments
Sequence Diagram Ver 2.odg
(17.82 KiB) Downloaded 100 times
Terry
Top
peter
Posts: 37
Joined: 05/02/2019, 10:11

Re: Document Used to Form the Basis of the Design

Post by peter »

Terry
the Minimum Voltage to start Train is 8 volts
and the maximum would be 10 volts , the cause is the drag from the lighting pickups
regards Peter
Top
Post Reply

Return to “Requirements”